Unified Wireless N600 Dual Band Concurrent Access Point for DWS-3160, DWS-4026, DWC-1000, DWC-2000 with Plenum Housing

The DWL-8600AP is D-Linkﾃ??s next generation Unified Access Point supporting the IEEE 802.11n standard. Versatile and powerful, this device can be flexibly deployed as a stand-alone "fat" wireless access point or as a "thin" managed access point (AP) manageable from a wireless switch. Businesses can start with an intelligent DWL-8600AP that provides many advanced Wireless LAN functions, and then migrate to a centrally managed system anytime later by integrating the same DWL-8600AP with a D-Link unified wired/wireless switch.
Blazing Wireless Speeds
802.11n offers up to six times increased throughput when compared with existing 802.11a/g networks. The DWL-8600AP is fully backwards compatible with 802.1a/b/g clients and allows for a 2x2:2 configuration with two Tx and Rx streams for each radio. Multiple In Multiple Out (MIMO) and wider bandwidth channels increase physical transfer rate over 802.11a/g. MIMO allows for more information to be coherently resolved by using several antennas instead of a single antenna. By employing the DWL-8600AP today, you can prepare your business for the future generation of wireless devices and mobile applications.
Intelligent "Fit" Access Point
The DWL-8600AP has everything on-board that enables network administrators to set up a secure wireless network. Advanced wireless functions that the DWL-8600AP supports include: WEP data encryption, WPA/WPA2 security, client MAC address filtering, AP load balancing, QoS/WMM (Wireless Multimedia), and Rogue AP Detection. Security configuration settings can be locally stored in the DWL-8600AP itself.
The DWL-8600AP offers AP Clustering and Wireless Distribution System (WDS) functions. With AP Clustering, up to 8 APs can form a cluster for convenient management and configuration of all APs. WDS allows for the AP to act as a wireless bridge, connecting two different networks to each other without the need for a cable.
Businesses without complicated network requirements can use the DWL-8600AP to get a wireless network set up and run without the need for any additional controller hardware, still leaving path for upgrade to a centralised wireless solution with a switch/controller.
"Thin" AP Centrally Managed by Unified Switch/Controller
Alternatively, the DWL-8600AP can operate in conjunction with D-Link DWC/DWS-series controllers and unified wired/wireless switches. In this mode, multiple DWL-8600AP access points can connect directly or indirectly to one of these switches to provide unparalleled security and wireless mobility for wireless clients. Each DWL-8600AP access point will be continually tuned by these switches to provide optimal RF channels and transmission power for all mobile clients, giving them the best wireless signals in both the 2.4GHz and 5GHz bands and uninterrupted wireless connectivity.
Flexible Dualband Wireless LAN Connectivity
The DWL-8600AP delivers concurrent wireless performance with maximum wireless signal rates in both frequency bands simultaneously. With dualband connectivity, two wireless networks are created both running at full bandwidth speeds, offering a significant increase in total network capacity.
Optimal Wireless Performance
The architecture of most current wireless LAN controllers require wireless traffic to return to the controller for centralised processing, providing unnecessary traffic delay. The DWL-8600AP ﾃ?? when operating with a DWC/DWS-series controller/switch ﾃ?? offers administrators extra options. Depending on the wireless application, wireless traffic can either be tunnelled back to the switch for better security control, or locally forwarded at the access point for optimal performance. This device offers administrators maximized flexibility with options to tunnel guest traffic to the switch for centralised security control, and forward VoIP traffic directly from the access point for optimal performance.
Self Configuration and Easy Installation
When operating in conjunction with a DWC/DWS-series controller/switch, the switch automatically configures every connected ﾃ??thinﾃ?ﾝ DWL-8600AP access point, so no configuration is necessary during installation. If a DWL-8600AP needs to be replaced, the replacement DWL-8600AP automatically inherits the same configuration, making the replacement process a simple one.
Total Security & Quality of Service
The DWL-8600AP continuously scans both frequency bands and their associated channels to detect rogues while simultaneously providing wireless connectivity to mobile clients. If a rogue is detected, it reports the result to the wireless switch that manages it. From a management console, administrators can identify the rouge AP and take appropriate action. The DWL-8600AP supports 802.1Q VLAN Tagging and WMM (Wi-Fi Multimedia) for important wireless transmissions such as VoIP and streaming media applications, delivering critical user-based services, such as prioritized delivery of voice traffic.